HQ extension cable - all lengths

This is a high quality and robust PUR extension cable with low internal resistance, reliable and maximum wear resistance. It is flexible up to -30°C and maximum resistant to wear and twisting.

Var. A - length 100cm

The length will extend the battery to your body. Use this HQ cable:

• if you frequently use an extension cable (e.g. on a bike)
• if you use the extension cable in the cold
• if you often use the headlamp on max mode (especially for Lucifer L and Lucifer X headlamps)

Var. B - length 10cm

This is a 10cm short extension cable that you will use:

• if you are pulling the whole headlamp onto a climbing/spelunking helmet
• if you are attaching the headlamp to the handlebars and the cable does not reach from the battery pack on the frame
• if you attach the headlamp with the battery pack to the bike helmet and the cable does not reach you

Var. C - length 5cm

This is a 5cm short extension cable that you will use:

• if you are pulling the entire headlamp onto a climbing/spelunking helmet
• if you are attaching the headlamp to the handlebars and the cable does not reach from the battery pack on the frame
• if you attach the headlamp with the battery pack to the bike helmet and the cable does not reach you

Var. D - length 33cm

This is a 33cm long extension cable, which you will use especially in orienteering to extend the battery to our battery-powered vest.

Var. E - custom length

Choose your own cable length from 5cm to 100cm. Please write the specific length you need in the order comments. We can't make a cable shorter than 5cm!

Production takes approximately 4 weeks, depending on our workload and production scheduling. We require payment in advance (not COD) for this product!

Manufacturer's specifications

• Guaranteed permanent application in multi-shift operation under extreme high bending stress
• Test of alternating bending cycles approx. 10 million
• High resistant to mechanical strain
• High property of alternating bending strength
• Long life durabilities through low friction-resistance by using the PP insulation
• High tensile strength-, abrasion- and impact resistant at low temperature

The connector is a high quality DC connector with max. current up to 7A, which holds the contact firmly and for a long time. The contacts are held together so tightly that spontaneous disconnection is impossible, but at the same time only so that they can be disconnected even in harsh conditions (e.g. in gloves in winter).